- Details
- Written by Laux René
Jetcat ECU V12.0 integrated telemetry
When using the telemetry cable to your receiver, don't forget to initialize the telemetry in the limits menu for your RC system.
Standard mode is 'disabled' and signal output is switched to 0V level. For Jeti you are then going in the low power reach testing mode!
- Details
- Written by Laux René
Stecker und Kabel
Welches Kabel und welchen Stecker benötige ich für mein Modell?
Blogartikel von voltmaster.de: https://www.voltmaster.de/blog/welches-kabel-und-welchen-stecker-benoetige-ich-fuer-mein-modell/